Johnny JAws North America, LLC
Get the Unfair Advantage!
Works on Any Standard Rear-Load and Front-Load Container
Johnny Jaws is compatible with any ANSI standard metal rear-load dumpster, no modifications required.
Made to be Modified
Johnny Jaws works with any ANSI standard metal rear-load dumpster -- no container modifications, no fork pocket welding, no pulling cans out of service.
To be compatible, the container's trunnion bar needs to meet two simple specs: a minimum end-to-end length of 77.5 inches and a maximum diameter of 1.75 inches. Most standard rear-load containers already meet both of these requirements right out of the yard.
That means if you're running metal rear-load dumpsters on your routes today, there's a good chance Johnny Jaws works on them exactly as they sit -- and your front-load truck can start servicing them in under 50 seconds each, with one driver, without leaving the cab.
In addition, Johnny Jaws is made-to-be-modified to adapt to not only all ANSI specified metal cans up to 4 cubic yards in capacity, but some not specified dumpsters as well.
Have a question about whether your specific containers are compatible? Call Bob at 412-853-8009.
Related Videos
Video Transcript:
0:00 With Johnny Jaws, you can service any ANSI
0:04 standard rear load container with a minimum trunnion bar length from
0:08 end to end of 77.5
0:12 inches and a trunnion bar diameter of
0:16 inch and three quarter maximum.